Global Automotive Damper Market By Type (Twin-Tube Type, Mono-Tube Type), By Vehicle Type (Commercial Vehicles, Passenger Vehicles), By Geographic Scope And Forecast

Automotive Damper Market Size And Forecast

Automotive Damper Market size was valued at USD 15.46 Billion in 2022 and is projected to reach USD 17.91 Billion by 2030, growing at a CAGR of 1.85% from 2023 to 2030. Automotive dampers help to solve the motion of the up and down wheels, which ensures the safety of the vehicle. Increasing demand for automobiles especially cars and bikes around the world might drive the Global Automotive Damper Market. The dampers help in reducing aerodynamic drag when operating on highways and expressways. The Global Automotive Damper Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Automotive Damper Market Definition

An automobile damper, commonly referred to as a shock absorber, is a mechanical component used in cars to regulate the suspension system's motion. Collecting and releasing the energy produced by the movement of the vehicle's wheels is essential for guaranteeing a comfortable and smooth ride. An automotive damper's main function is to minimize or dampen vibrations or oscillations caused by the suspension system. The suspension system of a car compresses and rebounds in response to bumps, potholes, and uneven road conditions, which causes the wheels to rise and fall. These motions can provide a bumpy or unsettling ride, which can influence the stability, handling, and comfort of the car as a whole.

The kinetic energy generated during suspension movement is converted into thermal energy by the automobile damper in order to counteract these oscillations. It does this by utilizing hydraulic or gas-powered technologies. A piston that travels inside a cylinder that is filled with hydraulic fluid or gas makes up the damper. The piston swings up and down when the suspension compresses and rebounds because it is attached to the vehicle's suspension parts, such as the control arm or axle. Small ports or valves inside the damper allow hydraulic fluid or gas to flow as the piston travels, producing resistance. This resistance aids in regulating the suspension's movement speed, reducing excessive oscillation and bouncing. The energy is wasted and transformed into heat, which is subsequently dispersed into the surrounding air, through compression and expansion of the fluid or gas inside the damper.

What's inside a VMR industry report?

Our reports include actionable data and forward-looking analysis that help you craft pitches, create business plans, build presentations and write proposals.

Global Automotive Damper Market Overview

Automotive Damper is a mechanical or automotive component used to dampen road stress when a vehicle is moving along a road. It is employed to dampen and regulate spring vibrations. It may be used in many different kinds of vehicles, from motorcycles to LMVs. By transforming mechanical energy into thermal energy, which disperses the shock away from the vehicle's chassis, it aids in shock absorption.

Automobile dampers assist in reducing the up-and-down motion of the wheels, hence enhancing vehicle safety. The worldwide Automotive Damper Market may be driven by the rising demand for vehicles, particularly cars and bikes. When driving on highways and motorways, the dampers aid in lowering aerodynamic drag. The market for automobile dampers is expected to be driven by increased daily travel lengths brought on by the expansion of cities throughout the world and the desire for a smooth ride to reduce jerks on roads with uneven surfaces. The market for automotive dampers is expected to grow as a result of advancements made in the areas of ride handling, turn-off response, and vehicle cornering stability.

There are several limitations and difficulties that will prevent the market from expanding. Rapid technological advancements and new emerging trends might result in advancements in damper technology. The worldwide market might be impacted by rising expenses brought on by the new trends. Even the increase in raw material prices might impede the market's expansion. Additionally, as a result of the expenditures made in R&D, costs have increased, leading to a replacement effect that causes high-end materials to be replaced with low-end ones in order to boost turnover margins.

Global Automotive Damper Market Segmentation Analysis

The Global Automotive Damper Market is Segmented on the basis of Type, Vehicle Type, And Geography.

Automotive Damper Market, By Type

• Twin-tube Type
• Mono-tube Type
• Hydraulic Type
• Pneumatic Type

Based on Type, the market is segmented into Twin-tube Type, Mono-tube Type, Hydraulic Type, and Pneumatic Type. Automotive hydraulic dampers enhance vehicle performance by giving the suspension more control. They ensure a smoother and more pleasant ride for the occupants by absorbing shocks and vibrations brought on by uneven road conditions. The demand for hydraulic dampers is significantly influenced by this improved ride quality. Additionally, hydraulic dampers are essential for preserving the stability and control of the vehicle. They improve overall safety and handling qualities by reducing body roll, pitch, and yaw during turning, braking, and accelerating. Hydraulic dampers are increasingly in demand as consumer and manufacturer objectives for vehicle dynamics and driver safety continue to climb.

Automotive Damper Market, By Vehicle Type

• Commercial Vehicles
• Passenger Vehicles

Based on Vehicle Type, the market is segmented into Commercial Vehicles and Passenger Vehicles. The Automotive Damper Market share for passenger cars held the largest share in 2022. In terms of sales volume, passenger automobiles have typically been the largest category in the automotive industry. The massive global production and sales of passenger automobiles are a factor in the higher market share for automotive dampers in this industry. Additionally, passenger automobiles put the occupants' comfort and ride quality first. By absorbing shocks and vibrations from uneven road conditions, automotive dampers play a significant part in ensuring a comfortable and smooth ride. The market for automotive dampers in this sector is driven by consumer desire for better ride comfort in passenger automobiles.

Automotive Damper Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the world
• On the basis of Geography, the Global Automotive Damper Market is classified into North America, Europe, Asia Pacific, Rest of the World. China, India, Japan, and South Korea have all made substantial contributions to the automobile industry's expansion in the APAC area. Rising disposable incomes, more urbanization, and improved infrastructure all contribute to this rise. The need for automobile dampers rises along with the number of cars on the road. Additionally, several APAC nations are developing their infrastructure quickly, especially by building motorways, motorways, and urban road networks. However, the region's roads can still be difficult to travel on due to their uneven surfaces and potholes. Automotive dampers are essential for reducing vibrations and shocks, resulting in a smoother and more pleasant ride. As a result, the need for dampers is increasing in APAC to enhance the driving experience as a whole.

Key Players

• The "Global Automotive Damper Market" study report will provide valuable insight with an emphasis on the global market. The major players in the market are
• BILSTEIN, Gabriel Ride Control Products Inc., Hitachi, Ltd., KONI, KYB Corporation, Magneti Marelli S.p.A., The Mando Corporation, Showa Corporation, Tenneco, and ZF Friedrichshafen AG.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with product benchmarking and SWOT analysis.

• Ace Matrix Analysis
• The Ace Matrix provided in the report would help to understand how the major key players involved in this industry are performing as we provide a ranking for these companies based on various factors such as service features & innovations, scalability, innovation of services, industry coverage, industry reach, and growth roadmap. Based on these factors, we rank the companies into four categories as
• Active, Cutting Edge, Emerging, and Innovators.
• Market Attractiveness
• The image of market attractiveness provided would further help to get information about the region that is majorly leading in the Global Automotive Damper Market. We cover the major impacting factors that are responsible for driving the industry growth in the given region.
• Porter's Five Forces
• The image provided would further help to get information about Porter's five forces framework providing a blueprint for understanding the behavior of competitors and a player's strategic positioning in the respective industry. Porter's five forces model can be used to assess the competitive landscape in the Global Automotive Damper Market, gauge the attractiveness of a certain sector, and assess investment possibilities.