Automotive Composite Market -Global Industry Size, Share, Trends, Opportunity, and Forecast, Segmented By Application Type, By Material Type, By Region & Competition, 2019-2029F

The Global Automotive Composite market was valued at USD 9.50 Billion in 2023 and is expected to reach USD 17.08 Billion by 2029 with a CAGR of 10.28% during the forecast period. The global automotive composite market is witnessing significant growth driven by the increasing demand for lightweight and high-performance materials to enhance vehicle efficiency and reduce emissions. The automotive industry's shift towards electrification has accelerated the adoption of composites in electric vehicles (EVs) to optimize weight and improve battery performance. Structural applications such as chassis, body frames, and suspension components are seeing robust growth due to the superior strength-to-weight ratio of advanced composites like carbon fiber-reinforced polymers (CFRPs) and glass fiber-reinforced polymers (GFRPs). Stringent environmental regulations and fuel economy standards are further pushing manufacturers to replace traditional materials with composites, fostering innovation in the market.

Emerging trends in the automotive composite sector include the development of cost-effective manufacturing processes, such as resin transfer molding (RTM) and automated fiber placement, which enable mass production without compromising material properties. The rise of hybrid composites, combining different fiber types, offers tailored solutions for specific automotive applications. Lightweighting initiatives are driving innovation in both thermoset and thermoplastic composites, with a growing focus on recyclability to address end-of-life vehicle regulations. Opportunities abound in electric and autonomous vehicles, where the need for lightweight materials to extend range and support advanced sensor systems is critical.

Despite its rapid growth, the market faces challenges such as high production costs, complex manufacturing processes, and difficulties in recycling certain composite materials. The need for specialized equipment and expertise can increase operational expenses, posing barriers for small and medium-sized manufacturers. Concerns over the environmental impact of non-recyclable composites and limited supply of raw materials, such as carbon fibers, add to the challenges. However, ongoing research into sustainable materials and improvements in production efficiency are expected to mitigate these obstacles, paving the way for sustained market growth.

Market Drivers

Demand for Lightweight Materials

Automakers increasingly emphasize reducing vehicle weight to improve fuel efficiency and performance, especially in the context of tightening global emissions standards. Composites such as carbon fiber-reinforced polymers (CFRPs) and glass fiber-reinforced polymers (GFRPs) have emerged as ideal solutions due to their exceptional strength-to-weight ratios. Compared to metals like steel or aluminum, composites provide equivalent or superior structural integrity while being significantly lighter. This weight reduction translates to better acceleration, handling, and fuel economy, particularly crucial for electric vehicles (EVs) and hybrid vehicles. Automakers are also leveraging lightweight composites to counterbalance the added weight of modern safety features and infotainment systems. As the demand for more efficient and sustainable transportation grows, lightweight composites are becoming indispensable in vehicle design.

Growth of Electric Vehicles (EVs)

The transition to EVs has accelerated the adoption of advanced composites in automotive manufacturing. Lightweight materials are critical for improving EV range by reducing the overall weight of the vehicle and, consequently, the energy required to propel it. Beyond weight considerations, composites also contribute to thermal management in battery enclosures and structural components, addressing the unique design and safety challenges posed by EVs. Additionally, the use of composites enables the design of sleek, aerodynamic shapes that further enhance efficiency. As the global EV market expands, driven by consumer demand and government incentives, the integration of composites in EV production is expected to grow exponentially. For instance, as per the International Energy Agency report, In 2023, global electric car sales approached 14 million units, with 95% of these sales occurring in China, Europe, and the United States. The total number of electric vehicles registered worldwide reached 40 million, following the addition of nearly 14 million new electric cars in 2023. This figure represents an increase of 3.5 million units compared to 2022, marking a 35% rise year-on-year. This growth is more than sixfold compared to the sales figures from 2018, just five years prior.

Advancements in Manufacturing Technologies

Technological innovations in composite manufacturing have significantly improved the feasibility of mass production. Processes like resin transfer molding (RTM), automated fiber placement, and out-of-autoclave curing techniques allow manufacturers to produce high-quality components more efficiently. These advancements have reduced production costs and improved consistency in composite parts, encouraging their adoption across the automotive sector. As automation continues to optimize production lines, the scalability of composite manufacturing will expand, making these materials accessible for both luxury and mass-market vehicles.

Key Market Challenges

High Production Costs

The cost of producing composites, particularly CFRPs, remains a significant barrier to widespread adoption. Carbon fibers, a primary component in many advanced composites, require energy-intensive production processes that drive up costs. Manufacturing composite parts often involves specialized equipment and skilled labor, which increases capital and operational expenses. This cost factor is especially problematic for manufacturers targeting the mass market, where affordability is critical. Efforts to develop cost-effective raw materials and processes are ongoing but have yet to fully address this challenge.

Recycling and Sustainability Issues

Despite their advantages, composites face challenges regarding end-of-life disposal and recycling. Thermoset composites, which are widely used for their rigidity and durability, are particularly difficult to recycle because they cannot be remelted or reshaped. This creates a waste management issue, especially as environmental regulations tighten. While thermoplastic composites offer better recyclability, their adoption is still limited due to their higher costs and performance trade-offs in certain applications. Finding sustainable solutions for recycling composites is crucial to ensuring their long-term viability.

Complex Manufacturing Processes

Producing composite materials and components often involves intricate processes that require advanced machinery and highly trained personnel. Techniques like resin infusion and curing are time-consuming and sensitive to errors, which can lead to higher rejection rates and production inefficiencies. For automakers accustomed to faster and more streamlined production cycles with metals, integrating composite manufacturing can disrupt workflows and increase costs. Simplifying and standardizing composite production techniques is essential to overcoming this hurdle.

Key Market Trends

Rise of Hybrid Composites

Hybrid composites, which combine different types of fibers or materials, are emerging as a solution to balance performance, cost, and application-specific requirements. For example, combining carbon and glass fibers can achieve a compromise between strength, weight, and affordability. Hybrid composites are being tailored to meet the diverse needs of automotive applications, such as impact resistance in bumpers or stiffness in suspension components. This trend reflects the industry's focus on creating versatile materials for a wide range of vehicles.

Adoption in Electric and Autonomous Vehicles

The rise of electric and autonomous vehicles is driving the integration of lightweight composites. These materials help reduce battery loads and improve range in EVs while also supporting the structural integrity needed for advanced sensor systems in autonomous vehicles. Composites are being engineered to address specific challenges, such as shielding sensors from environmental interference and integrating seamlessly with electronic systems. This trend underscores the importance of composites in shaping the future of mobility.

Focus on Recyclable Composites

Thermoplastic composites and bio-based materials are gaining traction as sustainable alternatives to traditional thermosets. Thermoplastics can be reshaped and recycled, addressing key environmental concerns and aligning with regulatory pressures for sustainability. Bio-based composites, derived from renewable sources like natural fibers, offer an eco-friendly option without compromising performance. The development of these recyclable materials represents a significant step toward achieving a circular economy in automotive manufacturing. For instance, In 2024, as sustainability becomes increasingly important to consumers, Renault has opted to address this demand by equipping its new all-electric vehicle with low-CO2 materials sourced from Forvia (formerly known as Faurecia). These materials, which include NAFILean-R and Ecorium, feature recycled polypropylene (PP) and polyethylene terephthalate (PET), as well as natural components like hemp fiber. Developed in collaboration with recyclers Veolia and APM, and supplied by Materi'act, this innovative material achieves a 73% reduction in CO2 emissions and a 20% decrease in weight, all while adhering to rigorous standards for durability, crash safety, and cabin air quality.

Segmental Insights

Application Type Insights

Structural assemblies are the leading segment in the automotive composite market. This dominance stems from the widespread use of composites in lightweight vehicle design to improve fuel efficiency and reduce emissions. As regulatory bodies like the EPA and EU emphasize stricter emission norms, automakers are increasingly adopting composites to meet weight reduction targets. Structural composites, typically made from materials such as carbon fiber-reinforced plastics (CFRPs) and glass fiber-reinforced plastics (GFRPs), exhibit high strength-to-weight ratios, durability, and resistance to corrosion, making them indispensable for primary vehicle structures. For electric vehicles (EVs), structural composites play a vital role in battery housing and chassis construction to counterbalance the added weight of batteries. With major players such as BMW, Tesla, and Audi integrating structural composites into their vehicle designs, the segment benefits from technological advancements and economies of scale. Moreover, aerospace-inspired manufacturing processes, such as Resin Transfer Molding (RTM) and Sheet Molding Compound (SMC), are gaining traction, further bolstering this segment's appeal. The adoption of structural composites also aligns with the shift toward sustainable manufacturing. Innovations in bio-based and recyclable composites make this segment environmentally friendly and economically viable, ensuring its continued dominance in the market. With a focus on performance optimization and regulatory compliance, structural assemblies are set to remain the cornerstone of the automotive composite industry.

Region Insights

Asia-Pacific emerged as a dominant region in the global automotive composite market, driven by its well-established automotive manufacturing base and significant advancements in material innovation. The region's robust automotive industry, coupled with a focus on lightweight and performance enhancement, has positioned it as a key consumer and producer of automotive composites. Nations like China, Japan, and India are at the forefront, leveraging their extensive production capabilities and skilled labor force to cater to both domestic and international markets. The high volume of vehicle production, particularly in passenger cars and commercial vehicles, has spurred the adoption of composites to meet efficiency, safety, and sustainability goals.

The growing presence of electric vehicle (EV) manufacturing in Asia-Pacific has further fueled the demand for advanced composites. These materials are critical in reducing vehicle weight, thereby enhancing battery efficiency and driving range-factors pivotal in the EV segment. Governments in the region have introduced supportive policies and incentives for EV adoption, which in turn drives the utilization of composites in structural and battery components. Additionally, increasing consumer awareness of fuel efficiency and environmental impact has encouraged automakers to incorporate lightweight composites into their designs.

Asia-Pacific's strong emphasis on research and development has led to significant innovations in composite materials and manufacturing techniques. Countries in the region are investing in automation and cost-effective production methods, such as resin transfer molding (RTM) and thermoplastic processing, to meet the growing demand for high-quality automotive components. These technological advancements enable manufacturers to balance performance, cost, and sustainability, ensuring competitiveness in global markets. Furthermore, the availability of raw materials, including carbon fibers and resins, enhances the region's ability to support large-scale production.

The rise of middle-class populations and increasing vehicle ownership in emerging economies have also contributed to Asia-Pacific's dominance in the automotive composite market. Consumers are demanding vehicles that offer a combination of performance, affordability, and sustainability, prompting automakers to adopt advanced materials. Moreover, stricter government regulations on fuel emissions and efficiency standards are driving the adoption of lightweight composites to achieve compliance without compromising performance. With its strong industrial base, innovative material solutions, and increasing focus on sustainability, Asia-Pacific continues to lead the global automotive composite market in 2023.

Key Market Players

• Toray TCAC Holding B.V
• SGL Carbon SE
• Hexcel Corporation
• Mitsubishi Chemical Carbon Fiber and Composites, Inc.
• mouldCAM Pty Ltd.
• Nippon Sheet Glass Co., Ltd
• Sigmatex (UK) Limited
• Solvay SA
• Magna International Inc.
• Plasan Sasa Ltd.

Report Scope:

In this report, the Global Automotive Composite market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:

Automotive Composite Market, By Application Type:

• Structural Assembly
• Powertrain Component
• Interior
• Exterior

Automotive Composite Market, By Material Type:

• Thermoset Polymer
• Thermoplastic Polymer
• Carbon Fiber
• Glass Fiber

Automotive Composite Market, By Region:

• North America
  • United States
  • Canada
  • Mexico
• Europe & CIS
  • France
  • Germany
  • Spain
  • Italy
  • United Kingdom
  • Rest of Europe
• Asia-Pacific
  • China
  • Japan
  • India
  • Vietnam
  • South Korea
  • Australia
  • Thailand
• Middle East & Africa
  • South Africa
  • Saudi Arabia
  • UAE
  • Turkey
• South America
  • Brazil
  • Argentina

Competitive Landscape

Company Profiles: Detailed analysis of the major companies present in the Global Automotive Composite Market.

Available Customizations:

Global Automotive Composite Market report with the given market data, TechSci Research offers customizations according to a company's specific needs. The following customization options are available for the report:

Company Information

• Detailed analysis and profiling of additional market players (up to five).