Hydraulic Cylinders Market By Function, By Design, By Bore Size : Global Opportunity Analysis and Industry Forecast, 2021-2030

Description

The hydraulic cylinders market was valued at $14,070.0 million in 2020 and is estimated to reach $21,243.2 million by 2030, exhibiting a CAGR of 4% from 2021 to 2030.

Hydraulic cylinders are essential mechanical tools that transform hydraulic energy into linear mechanical force and movement. They are vital in a wide range of industrial uses that involve heavy lifting, pushing, pulling, or holding tasks. The fundamental concept behind hydraulic cylinders involves the utilization of pressurized hydraulic fluid to produce force, usually through a piston housed within a cylindrical structure.

A hydraulic cylinder consists of various key parts such as a cylinder barrel, piston, piston rod, seals, and hydraulic fluid. The cylinder barrel acts as the primary structure containing the hydraulic fluid, with the piston separating the cylinder into the rod side and cap side chambers. The piston rod extends from the piston to transmit the force to the external load or machinery. Seals play a crucial role in preserving the hydraulic fluid's integrity inside the cylinder and avoiding any leaks.

Hydraulic cylinders function according to Pascal's principle, which asserts that when pressure is exerted on a confined fluid, it applies equal pressure in all directions. In a hydraulic cylinder, hydraulic fluid is pumped into one side of the cylinder, prompting the piston to move in the intended direction. The force produced by the hydraulic fluid acting on the piston is transferred through the piston rod to the external load, allowing for linear motion.

By function, the hydraulic cylinders market is classified into single acting hydraulic cylinders, and double acting hydraulic cylinders. Double-acting hydraulic cylinders utilize hydraulic fluid to generate force in two directions, facilitating the extension and retraction of the piston. In contrast to single-acting cylinders that necessitate an external force or spring for retraction, double-acting cylinders feature ports at both ends for fluid intake and discharge. This configuration enables accurate control and uniform power in both directions, rendering them well-suited for tasks demanding both pushing and pulling actions, like those found in industrial machinery, construction equipment, and material handling systems. Their adaptability and effectiveness elevate performance in a range of demanding and dynamic operations.

By design, the market is categorized into tie-rod hydraulic cylinders and welded hydraulic cylinders. Welded hydraulic cylinders are a type of hydraulic cylinder where the end caps are welded directly to the cylinder barrel, creating a more compact and robust design compared to tie-rod cylinders. Tie-rod hydraulic cylinders utilize high-strength steel rods to connect cylinder components, ensuring structural integrity and strength. These cylinders, commonly found in industrial settings, are known for their cost-effectiveness, ease of maintenance, and versatility. With different sizes and configurations available, tie-rod cylinders are suitable for a wide range of tasks, from basic lifting and pushing to intricate machinery operations in manufacturing and automation systems.

By Bore Size, the market is categorized into less than 50mm hydraulic cylinders, 51mm to 100mm hydraulic cylinders, 101mm to 150 mm hydraulic cylinders, and greater than 151mm hydraulic cylinders. Hydraulic cylinders are crucial elements in a wide range of industrial uses, offering flexible and robust solutions for medium-duty tasks. They are commonly found in construction machinery, agricultural equipment, material handling systems, and manufacturing processes. Their size range strikes a good balance between force output and compactness, making them ideal for applications that call for moderate force and precision. The demand for hydraulic cylinders with bore sizes ranging from 51mm to 100mm is fueled by their adaptability, reliability, and efficiency in various operational settings, playing a significant role in the growth and technological progress of the hydraulic cylinders market.

The hydraulic cylinders market is segmented into function, design, bore size, and region. On the basis of function, the market is classified into single acting cylinders, and double acting cylinders. In 2020, the double acting cylinders segment dominated the market, and single acting cylinders segment is expected to acquire a major market share by 2030. On the basis of design, the market is categorized into tie-rod cylinders, and welded cylinders. The welded cylinders segment acquired the largest share in 2020 and tie-rod cylinders segment is expected to grow at a significant CAGR from 2021 to 2030. On the basis of bore size, the market is segregated into less than 50mm, 51mm to 100mm, 101mm to 150mm, and greater than 151mm. In 2020, the 51mm to 100mm segment dominated the market, and 101mm to 150mm is expected to acquire a major market share by 2030. On the basis of region, the hydraulic cylinders market trends are analyzed across North America (the U.S., Canada, and Mexico), Europe (the UK, Germany, France, and rest of Europe), Asia-Pacific (China, Japan, India, South Korea, and rest of Asia-Pacific), and LAMEA (Latin America, Middle East, and Africa).

Competition Analysis

Key companies profiled in the articulated industrial robot market include Actuant Corporation, Caterpillar Inc., Eaton Corporation Plc, JARP Industries Inc., Hengli Hydraulic, Kawasaki Heavy Industries Limited, Parker Hannifin Corporation, Robert Bosch GmbH (Bosch Rexroth AG), Texas Hydraulics Inc., and Wipro Limited.

Key Benefits for Stakeholders

The report provides an extensive analysis of the current and emerging Hydraulic cylinders Market trends and dynamics.
In-depth Hydraulic cylinders market analysis is conducted by constructing market estimations for key market segments between 2021 and 2030.
Extensive analysis of the Hydraulic cylinders Market is conducted by following key product positioning and monitoring of top competitors within the market framework.
A comprehensive analysis of all the regions is provided to determine the prevailing opportunities.
The global Hydraulic cylinders Market forecast analysis from 2021 to 2030 is included in the report.
The key players within Hydraulic cylinders Market are profiled in this report and their strategies are analyzed thoroughly, which helps understand the competitive outlook of the Hydraulic cylinders industry.

Additional benefits you will get with this purchase are:

Quarterly Update and* (only available with a corporate license, on listed price)
5 additional Company Profile of client Choice pre- or Post-purchase, as a free update.
Free Upcoming Version on the Purchase of Five and Enterprise User License.
16 analyst hours of support* (post-purchase, if you find additional data requirements upon review of the report, you may receive support amounting to 16 analyst hours to solve questions, and post-sale queries)
15% Free Customization* (in case the scope or segment of the report does not match your requirements, 15% is equivalent to 3 working days of free work, applicable once)
Free data Pack on the Five and Enterprise User License. (Excel version of the report)
Free Updated report if the report is 6-12 months old or older.
24-hour priority response*
Free Industry updates and white papers.

Possible Customization with this report (with additional cost and timeline, please talk to the sales executive to know more)

Industry life cycle assessment, by region
Investment Opportunities
Product Life Cycles
Technology Trend Analysis
Market share analysis of players by products/segments
Additional company profiles with specific to client's interest
Additional country or region analysis- market size and forecast
Average Selling Price Analysis / Price Point Analysis
Brands Share Analysis
Criss-cross segment analysis- market size and forecast
Expanded list for Company Profiles
Historic market data
Key player details (including location, contact details, supplier/vendor network etc. in excel format)
List of customers/consumers/raw material suppliers- value chain analysis
Market share analysis of players at global/region/country level
Product Consumption Analysis
SWOT Analysis
Volume Market Size and Forecast

Key Market Segments

By Function

Single Acting Cylinders
Double Acting Cylinders

By Design

Tie-rod Cylinders
Welded Cylinders

By Bore Size

Greater Than 151mm
Less Than 50mm
51mm to 100mm
101mm to 150mm

By Region

North America
- U.S.
- Canada
- Mexico
Europe
- Germany
- UK
- France
- Russia
- Rest of Europe
Asia-Pacific
- China
- Japan
- India
- South Korea
- Rest of Asia-Pacific
LAMEA
- Latin America
- Middle East
- Africa

Key Market Players:

Actuant Corporation
Caterpillar Inc.
Eaton Corporation plc
Hengli Hydraulics
Jarp Industries, Inc.
Kawasaki Heavy Industries Ltd.
Parker Hannifin Corporation
Robert Bosch GmbH
Texas Hydraulics
Wipro Limited

Product Code: A04719

CHAPTER 1: INTRODUCTION

1.1. Report description
1.2. Key market segments
1.3. Key benefits to the stakeholders
1.4. Research methodology
- 1.4.1. Primary research
- 1.4.2. Secondary research
- 1.4.3. Analyst tools and models

CHAPTER 2: EXECUTIVE SUMMARY

2.1. CXO perspective

CHAPTER 3: MARKET OVERVIEW

3.1. Market definition and scope
3.2. Key findings
- 3.2.1. Top impacting factors
- 3.2.2. Top investment pockets
3.3. Porter's five forces analysis
- 3.3.1. Moderate to high bargaining power of suppliers
- 3.3.2. Moderate to high threat of new entrants
- 3.3.3. Moderate to high threat of substitutes
- 3.3.4. Low to high intensity of rivalry
- 3.3.5. Moderate to high bargaining power of buyers
3.4. Market dynamics
- 3.4.1. Drivers
  - 3.4.1.1. Growth in global construction sector
  - 3.4.1.2. Rapid industrialization coupled with increasing infrastructural spending
  - 3.4.1.3. Retrofit and replacement of existing equipment
- 3.4.2. Restraints
  - 3.4.2.1. Oil leakages and timely maintenance
  - 3.4.2.2. Costly as compared to pneumatic cylinders
- 3.4.3. Opportunities
  - 3.4.3.1. Extensive range of applications
  - 3.4.3.2. Increasing demand for material handling equipments

CHAPTER 4: HYDRAULIC CYLINDERS MARKET, BY FUNCTION

4.1. Overview
- 4.1.1. Market size and forecast
4.2. Single Acting Cylinders
- 4.2.1. Key market trends, growth factors and opportunities
- 4.2.2. Market size and forecast, by region
- 4.2.3. Market share analysis by country
4.3. Double Acting Cylinders
- 4.3.1. Key market trends, growth factors and opportunities
- 4.3.2. Market size and forecast, by region
- 4.3.3. Market share analysis by country

CHAPTER 5: HYDRAULIC CYLINDERS MARKET, BY DESIGN

5.1. Overview
- 5.1.1. Market size and forecast
5.2. Tie-rod Cylinders
- 5.2.1. Key market trends, growth factors and opportunities
- 5.2.2. Market size and forecast, by region
- 5.2.3. Market share analysis by country
5.3. Welded Cylinders
- 5.3.1. Key market trends, growth factors and opportunities
- 5.3.2. Market size and forecast, by region
- 5.3.3. Market share analysis by country

CHAPTER 6: HYDRAULIC CYLINDERS MARKET, BY BORE SIZE

6.1. Overview
- 6.1.1. Market size and forecast
6.2. Less Than 50mm
- 6.2.1. Key market trends, growth factors and opportunities
- 6.2.2. Market size and forecast, by region
- 6.2.3. Market share analysis by country
6.3. 51mm to 100mm
- 6.3.1. Key market trends, growth factors and opportunities
- 6.3.2. Market size and forecast, by region
- 6.3.3. Market share analysis by country
6.4. 101mm to 150mm
- 6.4.1. Key market trends, growth factors and opportunities
- 6.4.2. Market size and forecast, by region
- 6.4.3. Market share analysis by country
6.5. Greater Than 151mm
- 6.5.1. Key market trends, growth factors and opportunities
- 6.5.2. Market size and forecast, by region
- 6.5.3. Market share analysis by country

CHAPTER 7: HYDRAULIC CYLINDERS MARKET, BY REGION

7.1. Overview
- 7.1.1. Market size and forecast By Region
7.2. North America
- 7.2.1. Key market trends, growth factors and opportunities
- 7.2.2. Market size and forecast, by Function
- 7.2.3. Market size and forecast, by Design
- 7.2.4. Market size and forecast, by Bore Size
- 7.2.5. Market size and forecast, by country
  - 7.2.5.1. U.S.
  - 7.2.5.1.1. Market size and forecast, by Function
  - 7.2.5.1.2. Market size and forecast, by Design
  - 7.2.5.1.3. Market size and forecast, by Bore Size
  - 7.2.5.2. Canada
  - 7.2.5.2.1. Market size and forecast, by Function
  - 7.2.5.2.2. Market size and forecast, by Design
  - 7.2.5.2.3. Market size and forecast, by Bore Size
  - 7.2.5.3. Mexico
  - 7.2.5.3.1. Market size and forecast, by Function
  - 7.2.5.3.2. Market size and forecast, by Design
  - 7.2.5.3.3. Market size and forecast, by Bore Size
7.3. Europe
- 7.3.1. Key market trends, growth factors and opportunities
- 7.3.2. Market size and forecast, by Function
- 7.3.3. Market size and forecast, by Design
- 7.3.4. Market size and forecast, by Bore Size
- 7.3.5. Market size and forecast, by country
  - 7.3.5.1. Germany
  - 7.3.5.1.1. Market size and forecast, by Function
  - 7.3.5.1.2. Market size and forecast, by Design
  - 7.3.5.1.3. Market size and forecast, by Bore Size
  - 7.3.5.2. UK
  - 7.3.5.2.1. Market size and forecast, by Function
  - 7.3.5.2.2. Market size and forecast, by Design
  - 7.3.5.2.3. Market size and forecast, by Bore Size
  - 7.3.5.3. France
  - 7.3.5.3.1. Market size and forecast, by Function
  - 7.3.5.3.2. Market size and forecast, by Design
  - 7.3.5.3.3. Market size and forecast, by Bore Size
  - 7.3.5.4. Russia
  - 7.3.5.4.1. Market size and forecast, by Function
  - 7.3.5.4.2. Market size and forecast, by Design
  - 7.3.5.4.3. Market size and forecast, by Bore Size
  - 7.3.5.5. Rest of Europe
  - 7.3.5.5.1. Market size and forecast, by Function
  - 7.3.5.5.2. Market size and forecast, by Design
  - 7.3.5.5.3. Market size and forecast, by Bore Size
7.4. Asia-Pacific
- 7.4.1. Key market trends, growth factors and opportunities
- 7.4.2. Market size and forecast, by Function
- 7.4.3. Market size and forecast, by Design
- 7.4.4. Market size and forecast, by Bore Size
- 7.4.5. Market size and forecast, by country
  - 7.4.5.1. China
  - 7.4.5.1.1. Market size and forecast, by Function
  - 7.4.5.1.2. Market size and forecast, by Design
  - 7.4.5.1.3. Market size and forecast, by Bore Size
  - 7.4.5.2. Japan
  - 7.4.5.2.1. Market size and forecast, by Function
  - 7.4.5.2.2. Market size and forecast, by Design
  - 7.4.5.2.3. Market size and forecast, by Bore Size
  - 7.4.5.3. India
  - 7.4.5.3.1. Market size and forecast, by Function
  - 7.4.5.3.2. Market size and forecast, by Design
  - 7.4.5.3.3. Market size and forecast, by Bore Size
  - 7.4.5.4. South Korea
  - 7.4.5.4.1. Market size and forecast, by Function
  - 7.4.5.4.2. Market size and forecast, by Design
  - 7.4.5.4.3. Market size and forecast, by Bore Size
  - 7.4.5.5. Rest of Asia-Pacific
  - 7.4.5.5.1. Market size and forecast, by Function
  - 7.4.5.5.2. Market size and forecast, by Design
  - 7.4.5.5.3. Market size and forecast, by Bore Size
7.5. LAMEA
- 7.5.1. Key market trends, growth factors and opportunities
- 7.5.2. Market size and forecast, by Function
- 7.5.3. Market size and forecast, by Design
- 7.5.4. Market size and forecast, by Bore Size
- 7.5.5. Market size and forecast, by country
  - 7.5.5.1. Latin America
  - 7.5.5.1.1. Market size and forecast, by Function
  - 7.5.5.1.2. Market size and forecast, by Design
  - 7.5.5.1.3. Market size and forecast, by Bore Size
  - 7.5.5.2. Middle East
  - 7.5.5.2.1. Market size and forecast, by Function
  - 7.5.5.2.2. Market size and forecast, by Design
  - 7.5.5.2.3. Market size and forecast, by Bore Size
  - 7.5.5.3. Africa
  - 7.5.5.3.1. Market size and forecast, by Function
  - 7.5.5.3.2. Market size and forecast, by Design
  - 7.5.5.3.3. Market size and forecast, by Bore Size

CHAPTER 8: COMPETITIVE LANDSCAPE

8.1. Introduction
8.2. Top winning strategies
8.3. Product mapping of top 10 player
8.4. Competitive dashboard
8.5. Competitive heatmap
8.6. Top player positioning, 2020

CHAPTER 9: COMPANY PROFILES

9.1. Wipro Limited
- 9.1.1. Company overview
- 9.1.2. Key executives
- 9.1.3. Company snapshot
- 9.1.4. Operating business segments
- 9.1.5. Product portfolio
- 9.1.6. Business performance
- 9.1.7. Key strategic moves and developments
9.2. Texas Hydraulics
- 9.2.1. Company overview
- 9.2.2. Key executives
- 9.2.3. Company snapshot
- 9.2.4. Operating business segments
- 9.2.5. Product portfolio
- 9.2.6. Key strategic moves and developments
9.3. Robert Bosch GmbH
- 9.3.1. Company overview
- 9.3.2. Key executives
- 9.3.3. Company snapshot
- 9.3.4. Operating business segments
- 9.3.5. Product portfolio
- 9.3.6. Business performance
9.4. Actuant Corporation
- 9.4.1. Company overview
- 9.4.2. Key executives
- 9.4.3. Company snapshot
- 9.4.4. Operating business segments
- 9.4.5. Product portfolio
- 9.4.6. Business performance
9.5. Caterpillar Inc.
- 9.5.1. Company overview
- 9.5.2. Key executives
- 9.5.3. Company snapshot
- 9.5.4. Operating business segments
- 9.5.5. Product portfolio
- 9.5.6. Business performance
9.6. Eaton Corporation plc
- 9.6.1. Company overview
- 9.6.2. Key executives
- 9.6.3. Company snapshot
- 9.6.4. Operating business segments
- 9.6.5. Product portfolio
- 9.6.6. Business performance
- 9.6.7. Key strategic moves and developments
9.7. Jarp Industries, Inc.
- 9.7.1. Company overview
- 9.7.2. Key executives
- 9.7.3. Company snapshot
- 9.7.4. Operating business segments
- 9.7.5. Product portfolio
9.8. Hengli Hydraulics
- 9.8.1. Company overview
- 9.8.2. Key executives
- 9.8.3. Company snapshot
- 9.8.4. Operating business segments
- 9.8.5. Product portfolio
9.9. Kawasaki Heavy Industries Ltd.
- 9.9.1. Company overview
- 9.9.2. Key executives
- 9.9.3. Company snapshot
- 9.9.4. Operating business segments
- 9.9.5. Product portfolio
- 9.9.6. Business performance
9.10. Parker Hannifin Corporation
- 9.10.1. Company overview
- 9.10.2. Key executives
- 9.10.3. Company snapshot
- 9.10.4. Operating business segments
- 9.10.5. Product portfolio
- 9.10.6. Business performance
- 9.10.7. Key strategic moves and developments